Dell PowerEdge SAS5I integrated Firmware Firmware Package Version: 00.10.51.00.06.12.05.00 Criticality - Urgent Table of Contents ================= 1 Introduction 2 Performing the Firmware Flash 3 Important Information 4 Known Issues / Limitations 5 Fixes/Enhancements 6 Previous Release Version 1.0 Introduction ================== This is a Firmware and Option BIOS flash install for the PowerEdge SAS5I integrated. Component Version MPT Firmware 00.10.51.00 SASBIOS 06.12.05.00 MPTUtil 01.04.04.00 2.0 Performing the Firmware Flash ================================== Web pack: -------- Download 1. Click "Download Now", to download the file. 2. When the File Download window appears, click "Save" this program to disk and click "OK". The Save As: window appears. 3. From the Save As: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click "Close". The file icon appears on your desktop. Hard Drive Floppy Disk Creation 1. Get 1 blank, formatted floppy disk. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click "Setup". A black MS-DOS window appears with a message indicating that you need 1 floppy diskette. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes. Installation 1. Insert the first (or the only) disk of the set into the Floppy drive. 2. Click "Start", click "Shutdown", click "Restart", and then click "OK". 3. Follow the on-screen instructions. Zip pack: --------- NOTE : Zip packs are only capable of flashing a single SAS5/E controller by using the batch file. To flash multiple controllers, please use the Webpack or Update Packages. Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive. Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click "Continue". 3. Specify the location to unzip the files. 4. Click on the "OK" button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the "OK" button to exit from the installer. Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute the batch file as described in readme.txt to perform flash. 4. After flash is complete, remove bootable media. 5. Reboot system for changes to take effect. Windows Update Package (available for Enterprise Servers): ---------------------------------------------------------- Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive. Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the "Install" button. 5. Follow the remaining prompts to perform the update. Linux Update Package: --------------------- Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive. Installation 1. Read over the release information presented by executing the "./FRMW_LX_RXXXXXX.BIN --version" command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell. 4. Follow the remaining prompts to perform the update. GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN: Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive. Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN. 3.0 Important Information ========================== 1. When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification will be displayed as "ATA" 2. Flashing back to the previous 00.06.50.00 FW will cause the controller to become inoperable. 4.0 Known Issues / Limitations ========================== In some platforms after flashing SAS 5 controller firmware using a DUP (Dell update Package) on the first reboot the SAS 5 controller may not be detected in the boot up process. This is expected, because of an extended controller reset required after flash. Once the boot is completed, restart again and the SAS 5 controller will get detected 5.0 Fixes/Enhancements ======================== 1. Fixed an issue that causes errors during cable disconnect scenarios when connected to a Dell MD3000 enclosure 2. Addressed an issue where interrupt warnings were seen during Operating system installations 3. Fixed an issue with rebuild progress reporting in an OS environment 4. Improved Tape performance on SAS 5/E with External SAS Tape Units 5. Disabled option in BIOS to change the "report device missing delay" which could potentially cause timing related issues and performance related issues with attached devices when toggled 6. Modified Webpack script for SAS 5 cards so that it is compatible with other 6th Generation SAS controllers 7. Modified the SAS5 Option ROM to improve CHS (Cylinder/Head/Sector) to LBA (Logical Block Address) translation, to add support for newer disk partition utilities 6.0 Previous Release Version ============================= Component Version MPT Firmware 00.10.49.00 SASBIOS 06.12.02.00 MPTUtil 01.04.04.00